# -*- coding: utf-8 -*- import sys from PyQt5.QtWidgets import * from CamOperation_class import CameraOperation from MvCameraControl_class import * from MvErrorDefine_const import * from CameraParams_header import * from PyUICBasicDemo import Ui_MainWindow import ctypes # 获取选取设备信息的索引，通过[]之间的字符去解析 def TxtWrapBy(start_str, end, all): start = all.find(start_str) if start >= 0: start += len(start_str) end = all.find(end, start) if end >= 0: return all[start:end].strip() # 将返回的错误码转换为十六进制显示 def ToHexStr(num): chaDic = {10: 'a', 11: 'b', 12: 'c', 13: 'd', 14: 'e', 15: 'f'} hexStr = "" if num < 0: num = num + 2 ** 32 while num >= 16: digit = num % 16 hexStr = chaDic.get(digit, str(digit)) + hexStr num //= 16 hexStr = chaDic.get(num, str(num)) + hexStr return hexStr if __name__ == "__main__": # ch:初始化SDK | en: initialize SDK MvCamera.MV_CC_Initialize() global deviceList deviceList = MV_CC_DEVICE_INFO_LIST() global cam cam = MvCamera() global nSelCamIndex nSelCamIndex = 0 global obj_cam_operation obj_cam_operation = 0 global isOpen isOpen = False global isGrabbing isGrabbing = False global isCalibMode # 是否是标定模式（获取原始图像） isCalibMode = True # 绑定下拉列表至设备信息索引 def xFunc(event): global nSelCamIndex nSelCamIndex = TxtWrapBy("[", "]", ui.ComboDevices.get()) # Decoding Characters def decoding_char(c_ubyte_value): c_char_p_value = ctypes.cast(c_ubyte_value, ctypes.c_char_p) try: decode_str = c_char_p_value.value.decode('gbk') # Chinese characters except UnicodeDecodeError: decode_str = str(c_char_p_value.value) return decode_str # ch:枚举相机 | en:enum devices def enum_devices(): global deviceList global obj_cam_operation deviceList = MV_CC_DEVICE_INFO_LIST() n_layer_type = (MV_GIGE_DEVICE | MV_USB_DEVICE | MV_GENTL_CAMERALINK_DEVICE | MV_GENTL_CXP_DEVICE | MV_GENTL_XOF_DEVICE) ret = MvCamera.MV_CC_EnumDevices(n_layer_type, deviceList) if ret != 0: strError = "Enum devices fail! ret = :" + ToHexStr(ret) QMessageBox.warning(mainWindow, "Error", strError, QMessageBox.Ok) return ret if deviceList.nDeviceNum == 0: QMessageBox.warning(mainWindow, "Info", "Find no device", QMessageBox.Ok) return ret print("Find %d devices!" % deviceList.nDeviceNum) devList = [] for i in range(0, deviceList.nDeviceNum): mvcc_dev_info = cast(deviceList.pDeviceInfo[i], POINTER(MV_CC_DEVICE_INFO)).contents if mvcc_dev_info.nTLayerType == MV_GIGE_DEVICE or mvcc_dev_info.nTLayerType == MV_GENTL_GIGE_DEVICE: print("\ngige device: [%d]" % i) user_defined_name = decoding_char(mvcc_dev_info.SpecialInfo.stGigEInfo.chUserDefinedName) model_name = decoding_char(mvcc_dev_info.SpecialInfo.stGigEInfo.chModelName) print("device user define name: " + user_defined_name) print("device model name: " + model_name) nip1 = ((mvcc_dev_info.SpecialInfo.stGigEInfo.nCurrentIp & 0xff000000) >> 24) nip2 = ((mvcc_dev_info.SpecialInfo.stGigEInfo.nCurrentIp & 0x00ff0000) >> 16) nip3 = ((mvcc_dev_info.SpecialInfo.stGigEInfo.nCurrentIp & 0x0000ff00) >> 8) nip4 = (mvcc_dev_info.SpecialInfo.stGigEInfo.nCurrentIp & 0x000000ff) print("current ip: %d.%d.%d.%d " % (nip1, nip2, nip3, nip4)) devList.append( "[" + str(i) + "]GigE: " + user_defined_name + " " + model_name + "(" + str(nip1) + "." + str( nip2) + "." + str(nip3) + "." + str(nip4) + ")") elif mvcc_dev_info.nTLayerType == MV_USB_DEVICE: print("\nu3v device: [%d]" % i) user_defined_name = decoding_char(mvcc_dev_info.SpecialInfo.stUsb3VInfo.chUserDefinedName) model_name = decoding_char(mvcc_dev_info.SpecialInfo.stUsb3VInfo.chModelName) print("device user define name: " + user_defined_name) print("device model name: " + model_name) strSerialNumber = "" for per in mvcc_dev_info.SpecialInfo.stUsb3VInfo.chSerialNumber: if per == 0: break strSerialNumber = strSerialNumber + chr(per) print("user serial number: " + strSerialNumber) devList.append("[" + str(i) + "]USB: " + user_defined_name + " " + model_name + "(" + str(strSerialNumber) + ")") elif mvcc_dev_info.nTLayerType == MV_GENTL_CAMERALINK_DEVICE: print("\nCML device: [%d]" % i) user_defined_name = decoding_char(mvcc_dev_info.SpecialInfo.stCMLInfo.chUserDefinedName) model_name = decoding_char(mvcc_dev_info.SpecialInfo.stCMLInfo.chModelName) print("device user define name: " + user_defined_name) print("device model name: " + model_name) strSerialNumber = "" for per in mvcc_dev_info.SpecialInfo.stCMLInfo.chSerialNumber: if per == 0: break strSerialNumber = strSerialNumber + chr(per) print("user serial number: " + strSerialNumber) devList.append("[" + str(i) + "]CML: " + user_defined_name + " " + model_name + "(" + str(strSerialNumber) + ")") elif mvcc_dev_info.nTLayerType == MV_GENTL_CXP_DEVICE: print("\nCXP device: [%d]" % i) user_defined_name = decoding_char(mvcc_dev_info.SpecialInfo.stCXPInfo.chUserDefinedName) model_name = decoding_char(mvcc_dev_info.SpecialInfo.stCXPInfo.chModelName) print("device user define name: " + user_defined_name) print("device model name: " + model_name) strSerialNumber = "" for per in mvcc_dev_info.SpecialInfo.stCXPInfo.chSerialNumber: if per == 0: break strSerialNumber = strSerialNumber + chr(per) print("user serial number: " + strSerialNumber) devList.append("[" + str(i) + "]CXP: " + user_defined_name + " " + model_name + "(" + str(strSerialNumber) + ")") elif mvcc_dev_info.nTLayerType == MV_GENTL_XOF_DEVICE: print("\nXoF device: [%d]" % i) user_defined_name = decoding_char(mvcc_dev_info.SpecialInfo.stXoFInfo.chUserDefinedName) model_name = decoding_char(mvcc_dev_info.SpecialInfo.stXoFInfo.chModelName) print("device user define name: " + user_defined_name) print("device model name: " + model_name) strSerialNumber = "" for per in mvcc_dev_info.SpecialInfo.stXoFInfo.chSerialNumber: if per == 0: break strSerialNumber = strSerialNumber + chr(per) print("user serial number: " + strSerialNumber) devList.append("[" + str(i) + "]XoF: " + user_defined_name + " " + model_name + "(" + str(strSerialNumber) + ")") ui.ComboDevices.clear() ui.ComboDevices.addItems(devList) ui.ComboDevices.setCurrentIndex(0) # ch:打开相机 | en:open device def open_device(): global deviceList global nSelCamIndex global obj_cam_operation global isOpen if isOpen: QMessageBox.warning(mainWindow, "Error", 'Camera is Running!', QMessageBox.Ok) return MV_E_CALLORDER nSelCamIndex = ui.ComboDevices.currentIndex() if nSelCamIndex < 0: QMessageBox.warning(mainWindow, "Error", 'Please select a camera!', QMessageBox.Ok) return MV_E_CALLORDER obj_cam_operation = CameraOperation(cam, deviceList, nSelCamIndex) ret = obj_cam_operation.Open_device() if 0 != ret: strError = "Open device failed ret:" + ToHexStr(ret) QMessageBox.warning(mainWindow, "Error", strError, QMessageBox.Ok) isOpen = False else: set_continue_mode() get_param() isOpen = True enable_controls() # ch:开始取流 | en:Start grab image def start_grabbing(): global obj_cam_operation global isGrabbing ret = obj_cam_operation.Start_grabbing(ui.widgetDisplay.winId()) if ret != 0: strError = "Start grabbing failed ret:" + ToHexStr(ret) QMessageBox.warning(mainWindow, "Error", strError, QMessageBox.Ok) else: isGrabbing = True enable_controls() # ch:停止取流 | en:Stop grab image def stop_grabbing(): global obj_cam_operation global isGrabbing ret = obj_cam_operation.Stop_grabbing() if ret != 0: strError = "Stop grabbing failed ret:" + ToHexStr(ret) QMessageBox.warning(mainWindow, "Error", strError, QMessageBox.Ok) else: isGrabbing = False enable_controls() # ch:关闭设备 | Close device def close_device(): global isOpen global isGrabbing global obj_cam_operation if isOpen: obj_cam_operation.Close_device() isOpen = False isGrabbing = False enable_controls() # ch:设置触发模式 | en:set trigger mode def set_continue_mode(): ret = obj_cam_operation.Set_trigger_mode(False) if ret != 0: strError = "Set continue mode failed ret:" + ToHexStr(ret) + " mode is " + str(is_trigger_mode) QMessageBox.warning(mainWindow, "Error", strError, QMessageBox.Ok) else: ui.radioContinueMode.setChecked(True) ui.radioTriggerMode.setChecked(False) ui.bnSoftwareTrigger.setEnabled(False) # ch:设置软触发模式 | en:set software trigger mode def set_software_trigger_mode(): ret = obj_cam_operation.Set_trigger_mode(True) if ret != 0: strError = "Set trigger mode failed ret:" + ToHexStr(ret) QMessageBox.warning(mainWindow, "Error", strError, QMessageBox.Ok) else: ui.radioContinueMode.setChecked(False) ui.radioTriggerMode.setChecked(True) ui.bnSoftwareTrigger.setEnabled(isGrabbing) # ch:设置触发命令 | en:set trigger software def trigger_once(): ret = obj_cam_operation.Trigger_once() if ret != 0: strError = "TriggerSoftware failed ret:" + ToHexStr(ret) QMessageBox.warning(mainWindow, "Error", strError, QMessageBox.Ok) # ch:存图 | en:save image def save_bmp(): ret = obj_cam_operation.Save_Bmp() if ret != MV_OK: strError = "Save BMP failed ret:" + ToHexStr(ret) QMessageBox.warning(mainWindow, "Error", strError, QMessageBox.Ok) else: print("Save image success") def is_float(str): try: float(str) return True except ValueError: return False # ch: 获取参数 | en:get param def get_param(): ret = obj_cam_operation.Get_parameter() if ret != MV_OK: strError = "Get param failed ret:" + ToHexStr(ret) QMessageBox.warning(mainWindow, "Error", strError, QMessageBox.Ok) else: ui.edtExposureTime.setText("{0:.2f}".format(obj_cam_operation.exposure_time)) ui.edtGain.setText("{0:.2f}".format(obj_cam_operation.gain)) ui.edtFrameRate.setText("{0:.2f}".format(obj_cam_operation.frame_rate)) # ch: 设置参数 | en:set param def set_param(): frame_rate = ui.edtFrameRate.text() exposure = ui.edtExposureTime.text() gain = ui.edtGain.text() if is_float(frame_rate)!=True or is_float(exposure)!=True or is_float(gain)!=True: strError = "Set param failed ret:" + ToHexStr(MV_E_PARAMETER) QMessageBox.warning(mainWindow, "Error", strError, QMessageBox.Ok) return MV_E_PARAMETER ret = obj_cam_operation.Set_parameter(frame_rate, exposure, gain) if ret != MV_OK: strError = "Set param failed ret:" + ToHexStr(ret) QMessageBox.warning(mainWindow, "Error", strError, QMessageBox.Ok) return MV_OK # ch: 设置控件状态 | en:set enable status def enable_controls(): global isGrabbing global isOpen # 先设置group的状态，再单独设置各控件状态 ui.groupGrab.setEnabled(isOpen) ui.groupParam.setEnabled(isOpen) ui.bnOpen.setEnabled(not isOpen) ui.bnClose.setEnabled(isOpen) ui.bnStart.setEnabled(isOpen and (not isGrabbing)) ui.bnStop.setEnabled(isOpen and isGrabbing) ui.bnSoftwareTrigger.setEnabled(isGrabbing and ui.radioTriggerMode.isChecked()) ui.bnSaveImage.setEnabled(isOpen and isGrabbing) # ch: 初始化app, 绑定控件与函数 | en: Init app, bind ui and api app = QApplication(sys.argv) mainWindow = QMainWindow() ui = Ui_MainWindow() ui.setupUi(mainWindow) ui.bnEnum.clicked.connect(enum_devices) ui.bnOpen.clicked.connect(open_device) ui.bnClose.clicked.connect(close_device) ui.bnStart.clicked.connect(start_grabbing) ui.bnStop.clicked.connect(stop_grabbing) ui.bnSoftwareTrigger.clicked.connect(trigger_once) ui.radioTriggerMode.clicked.connect(set_software_trigger_mode) ui.radioContinueMode.clicked.connect(set_continue_mode) ui.bnGetParam.clicked.connect(get_param) ui.bnSetParam.clicked.connect(set_param) ui.bnSaveImage.clicked.connect(save_bmp) mainWindow.show() app.exec_() close_device() # ch:反初始化SDK | en: finalize SDK MvCamera.MV_CC_Finalize() sys.exit()